elbows are expensive; consider replacing them and at a minimum clean out the vent hose and the vent opening outside your home. Since the Code change, dryers must be wired with separate neutral and ground wires, which requires the use of 4-prong electrical cords plugged into 4-slot outlets. Older, plastic, vent hoses are not recommended as a fire hazard, and even newer metallic ones deteriorate over time. Never attempt to change the receptacle, always install the correct cord that corresponds to the type of receptacle your house has. The part number for a four-wire cord is WX9X18 and can be purchased. My answer is some houses have three wire receptacles and some have four wire receptacles so dryers do not come with cord. Below is a picture that will help you determine the type of receptacle you have. Connect the two outside wires to the two outside post on the dryer terminal block. Test the dryer for proper operation and you're done. The dryer will have a terminal block with three wires and a green ground screw on the dryer case.
How to Install a New Dryer Cord - The Spruce
Tools and Materials You Will Need. Before the change, dryers used 3-prong cords that plugged into 3-slot electrical outlets (receptacles). When you convert from the 3-prong to the 4-prong configuration, you must make sure that the dryer's neutral terminal is not connected to the case ground. If there is not a strap or wire connecting the center post to ground you must find a wire to. Look at your dryer receptacle on your wall. That's why the cords are sold separately. It wasn't so bad, was it, even though that dryer cord adapter you really wanted isn't available?
Local hookup dating sites
Find a hookup for free